Original Standard 8pt Carbide Tipped Milling Cutters With Zinc Coating For EDCO Planers
1) Specification:
| Part Number | Description | O.D | I.D | Width | carbide | Suitable for Scarifier / Planners |
| Y1008F | small 8pt | 58.3mm
2.295" | 17.6mm/0.693"
20mm/0.787" | 6mm
0.236" | 4*8.5mm | Kut-Rite® - KR10
Sase® - SC10E - 9/16"
Smith® - SPS8 - 9/16"
Diteq® - G00007
Diteq® - G00008
Smith® - SPS8D - 3/4"
Smith® - SPS10D - 3/4"
Edco® - CPM-10 - 5/8"
EGM 25-10 Smith - SPS8D - 3/4" | Smith® - SPS10 - 9/16"
Husqvarna® - CG 200 S - 1/2"
Target Mini Planer® - MPL - 55H - 1/2"
Target Mini Planer® - MPL - 9H - 1/2"
Target Mini Planer® - MPL - 2E - 1/2"
Blastrac - BMP-265 SCARIFIER
Trelawny-FLOOR SCARIFIER TFP 260 RANGE |
2) Features:
- Hardened steel or tungsten carbide tipped (tct) cutters in cage set ups geared for specific needs
- Convenient both horizontal and vertical surfaces
- can remove all soft materials without damaging your surface
- control for fine work or aggressive grinding
- full ranges of tungsten pointed cutters
3) Descriptions:
Xinhe TCT cutters, mounted on concrete scarifiers removes mortar, elastomeric membrane, sidewalk trip hazards, highway lines and failed concrete cap. An excellent concrete surface preparation tool, they can remove existing epoxy coatings, thin set from ceramic tile installations, concrete underlayment leveling compounds, failed concrete topping and grout prior to the application of new coatings.
Applications:
- Cleaning and Texturing concrete and asphalt
- Removal of paint, rust, grease, ice deposits, line markings, and concrete laitance
- Concrete reduction and scabbling
- Removal of roof chippings
- Grooving applications
- Cleaning concrete formwork and shuttering
- Non-slip finishes
- Removal of concrete and plaster droppings
Feature:
Flail tungsten carbide cutter, 8 point–Select ultra-premium, long life flail cutters for your toughest
asphalt and concrete removal projects
Miller tungsten carbide cutter, 6 point –Ultra-premium, high grade tungsten carbide cutter that removes
thick film coatings, thermoplastics, epoxies and tape
DynaCut™ diamond blade, 5 point (single blade) –Ultra-premium, high performance diamond blades for
dry-cut on AC and PCC substrates.
Need to shave, groove, grind, route or plunge-cut? This blade is engineered to provide the longest lasting performance
If you are a distributor for surface prep machines, we will be able to provide all kinds of tool replacement for you. Pls contact us at carly@zzxinhe.com right now and we will reply within 24 hours.
Product Tags:
|
|
Original Standard 8pt Carbide Tipped Milling Cutters With Zinc Coating For EDCO Planers Images
|
